Makita Brushless Rebar Tying Set (3.0Ah) - 18V

Makita 18v Brushless Rebar Tying Tool

Features:

• Ultra fast tying - ties wire in about 0.95 of a second when tying D10 x D10 rebars with an 18V battery.
• Large tying capacity - for tying up to 4 x D13 rebar at the same time.
• Ergonomic design - with compact slime line design, central weight distribution and ergonomically shaped handle with sure grip rubber.
• Brushless - main motor delivers a runtime of over 5000 ties (based on a 5.0ah battery and subject to variation based on conditions, uses a secondary brushed motor).
• 2 Mode operation - with single mode for a tie with every trigger press or hold the trigger in continuous mode for rapid tying.
• Easy load wire - in just 3 simple steps you can load a wire reel with approximately 120 ties.
• On-tool hex wrench - supplied for maintenance of the wire path.
• Adjustable tying strength - that can be adjusted in 6 stages to optimise tension accordingly to the condition of the material.
• XPT - eXtreme Protection Technology protects against dust & moisture.

Specifications:
Voltage	18 V
Applicable Bars	D10 x D10 - (D13 x 2) x (D13 x 2)
Tie Wire	0.8 mm wire reels
Overall length	304 mm
Skin weight	2 kg

Makita BL1830B-L 18v 3Ah Lithium Battery With Indicators

Features:

• Fuel gauge indicator, displays charge remaining on battery in four stages
• Built in memory chip communicates the usage history with the charger
• Built in shock absorbers protect the cells from jobsite conditions
• High energy cells pack more power per cell to reduce number of cells and overall weight
• Large release button for easy removal from the tool
• Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
• 16 contact terminals provide consistent power and firm hold in any environment

Specifications:
Cell Capacity	3.0Ah
Charge Time	22mins w/DC18RC
Net Weight	640g
Voltage	18V

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

• Star Protection 
• Battery Fuel Gauge 
• Multi-contact slide type terminal
• Protective gel coating
• Active 3 Controls current, voltage and thermal temperature
• Shock absorbing construction
• The fastest charge times in the industry
• Intelligent battery & charger communication system
• Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
• Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
• Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
• Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
• Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
• Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
• Up 66% more run time than BL1830*
• 4-Stage battery fuel indicator
• 45 minute charge time

Specifications:
Voltage	18V
Dimensions LxWxH	11 x 8 x 6.5 cm
Weight	0.63 Kg