Makita 18V 3-Piece Brushless Combo Kit - 5.0Ah DLX3098TJ

Features:

• Brushless motor for more power and longer runtimes
• Aluminium hammer case
• One touch bit installation
• Electronic 3 stage impact selection
• T:mode for self drilling screws
• Variable speed control by trigger
• Ergonomically designed handle 

Specifications:
Impact Rate	1st 0-3,800 ipm 2nd 0-2,600 ipm 3rd 0-1,100 ipm
Max Fastening Torque	175 Nm
Net Weight	1.5 kg w/BL1830
No Load Speed	1st 0-3,600 rpm 2nd 0-2,100 rpm 3rd 0-1,100 rpm
Overall Length	117 mm
Capacity	Coarse Thread 22-125 mm High Tensile Bolt M5-M14 Machine Screws M4-M8 Standard Bolt M5-M16

Makita 18V Brushless Laminate Trimmer DRT50Z

Features:

• On/off switch with safety lock and variable speed - Prevents accidental start up of the tool during use or transport, protecting the user and the work piece
• Shaft lock - easy installation and removal of trimmer bit with single wrench by pressing the shaft lock
• Soft start - minimises start up shock and makes the tool start smoothly for optimum control
• BL Brushless Motor - Provides more power to the motor whilst increasing runtime and durability
• Variable speed control dial - The rotation speed of the tool can be changed from 10,000 - 30,000 rpm by turning the speed dial
• Aluminium base with accurate rack and pinion depth adjustment
• LED job light for improved visibility
• Constant speed control - Provides constant rotation speed regardless of load conditions
• Variety of optional accessories are available, sold separately.

Specifications:
Collet capacity	6.35 mm (1/4")
Net Weight	2.1 kg (w/ 6.0 Ah battery)
No Load Speed	10,000-30,000 rpm
Overall Length	226 mm

Makita 18v Li-ion 82mm Planer DKP180Z

Features:

• High capacity performance with up to 2 mm cutting depth
• Improved fan design enhances chip ejection
• Powerful 14,000 rpm motor delivers high cutting performance
• Electric brake for fast stopping of blades
• Foot on base protects work piece from scratches and damages

Specifications:
Voltage	18V
No Load Speed	14,000 rpm
Planing - Depth	2 mm
Planing - Width	82 mm
Shiplapping	9 mm
Length	333 mm
Weight	3.4 kg

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

• Star Protection 
• Battery Fuel Gauge 
• Multi-contact slide type terminal
• Protective gel coating
• Active 3 Controls current, voltage and thermal temperature
• Shock absorbing construction
• The fastest charge times in the industry
• Intelligent battery & charger communication system
• Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
• Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
• Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
• Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
• Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
• Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
• Up 66% more run time than BL1830*
• 4-Stage battery fuel indicator
• 45 minute charge time

Specifications:
Voltage	18V
Dimensions LxWxH (cm)	11 x 8 x 6.5
Weight	0.63 Kg

Makita DC18RC Active 3 Li-Ion Charger 

Features:

• Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:
Cell Capacity	1.5-5.0 Ah
Charge Time	15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight	820 g
Overall Length	185 mm
Voltage	18 V