Makita 18V 2-Piece Brushless Combo Kit - 5.0Ah DLX2279TJ

Features:

• Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
• Has one-touch slide chuck for the SDS plus bit
• Easy to grip handle
• Ergonomically made for improved power thrust
• Secure, comfortable grip if drilling with palm up or down
• Three-mode operation is: Rotation + Hammering, Hammering only and Rotation only
• Tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
• Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent, delivering greater run-times between charging batteries
• Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact

Specifications:
Manufacturer	Makita
Model No	DHR242Z
Battery (Type)	Lithium-Ion
Charging Time (min)	22
Battery Quantity (3.0 Ah)	0
Voltage (V)	18
Single Impact Energy (J)	2.4
Blows per minute (BPM)	0 - 4700
No Load Speed (RPM)	0 - 950
Net weight ( kg)	3.3
Capacity in Concrete (mm)	24
Capacity in Steel (mm)	13
Capacity in Wood (mm)	27

Makita 18v 125mm Li-ion Brushless Angle Grinder DGA504Z

Features:

• Easy to hold grip design with rubber for anti-skid
• Worlds deepest concrete cutting mobile angle grinder at a depth of 20 mm
• Excellent performance - as powerful as AC model
• Gear housing can be rotated to suit most cutting and grinding applications
• Automatic speed control changes the cutting speed according to load condition for an optimum operation
• Removable dust cover
• Anti-restart function prevents accidental start-up for safety even if the machine is plugged to power source with the lock-on switch on
• Extreme protection technology for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced

Specifications:
Voltage	18V
Wheel diameter	125 mm
No load speed	8,500 rpm
Dimensions (L x W x H)	362 x 140 x 145 mm
Weight	2.1 kg

Makita 5.0Ah Lithium Battery with Charge Indicator BL1850B-L

Features:

• Star Protection 
• Battery Fuel Gauge 
• Multi-contact slide type terminal
• Protective gel coating
• Active 3 Controls current, voltage and thermal temperature
• Shock absorbing construction
• The fastest charge times in the industry
• Intelligent battery & charger communication system
• Protective gel coating - Sensitive electronics are protected with a thick gel coating, preventing damage against dust & moisture.
• Shock absorbing construction - Battery cells are protected in an internal bumper case with foam pads at the base to protect against shock.
• Multi-contact slide terminal - Ensures stable contact with the tool even under extreme vibration.
• Overload Protection - The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw.
• Over-discharge Protection - Monitors battery charge capacity and cuts power to protect battery cells.
• Over heat protection - Extreme heat damages ALL batteries. If the battery reaches a certain level of heat it will cut power to the tool.
• Up 66% more run time than BL1830*
• 4-Stage battery fuel indicator
• 45 minute charge time

Specifications:
Voltage	18V
Dimensions LxWxH (cm)	11 x 8 x 6.5
Weight	0.63 Kg

Makita DC18RC Active 3 Li-Ion Charger 

Features:

• Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition

Specifications:
Cell Capacity	1.5-5.0 Ah
Charge Time	15 mins (1.5 Ah) 22 mins (3.0 Ah) 36 mins (4.0 Ah) 45 mins (5.0 Ah)
Net Weight	820 g
Overall Length	185 mm
Voltage	18 V