RRP $2,917.20 SAVE $340.01
  • Dispatch in: 1-2 days

This TradeQuip "Made for the Trade" 50,000kg Pneumatic Workshop Press with Gauge and Winch is great for straightening, stamping, bending and pressing any component that is hard to handle. Polished inner cylinder walls extend the life of the hydraulic seals to minimize abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. Equipped with a hand winch for easy adjustment of press bed height. 

When components need to be removed or assembled, this pneumatic press delivers the controlled power to get the job done. Remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with this versatile hydraulic press!



  • Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
  • Two speed pump operates the ram at a slow or fast speed to accommodate a wide variety of pressing applications
  • 100mm pressure gauge
  • Push-button air trigger ram travel control
  • Polished pneumatic aluminum air motor with polyurethane double seal setup
  • Bed winch for easy raise and lower adjustment
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
  • Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
  • Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
  • Includes hand winch for fast and easy press bed height adjustments
  • Integrated overload protection valve keeps from overloading the system
  • Double spring ram return for fast ram retraction
  • Extra tall working range for versatility


  • Safe Working Capacity: 50,000kg
  • Working Range: 0-1035mm
  • Overall Height: 1600mm
  • Overall Width: 1220mm
  • Overall Depth: 800mm
  • Bed Outside: 325mm
  • Bed Inside: 185mm
  • Bed Width: 690mm
  • Piston Ram Stroke: 175mm
  • Ram Diameter: 60mm
  • Bed Height Settings: 6
  • Operating Air Pressure: 100-175 psi
  • Nett Weight: 224kg
  • Carton: 1890 x 940 x 400mm
  • Gross Weight: 253kg

Intended Use

For regular professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.



Barcode # 9332105010778
Brand TradeQuip

Be The First To Review This Product!

Help other EagleXP T/A Workshop360 users shop smarter by writing reviews for products you have purchased.

Write a product review